Motorized roller blinds have multiple functions such as UV resistance, environmental protection and energy saving, beautification of the environment, and indoor space saving, and are suitable for various office and apartment buildings. It is precisely because of its beauty and convenience that the frequency of use of electric roller shutters in modern buildings is very high.
However, although electric roller blinds are very convenient to use, there are still some problems to pay attention to when installing and operating. Groupeve has collected and sorted out the following 11 precautions, hoping to be helpful to everyone.
1. In the running direction of the electric roller shutter, please try not to place objects;
2. When retracting the curtain, be sure to remove the rolling tube and the items of the curtain, and cannot stand two meters in front of the curtain to prevent the rolling curtain from hurting people. The operator should stand on the side of the reducer in order to observe the overall condition of the roller shutter. When lifting and unwinding the roller blind, be sure to concentrate, remember to leave after the power is turned on, so that the roller blind will continue to work even after it is rolled to the end, in order to prevent damage from rolling down the ceiling after the head is rolled. If it is placed in position, it will form a roll and it will easily cause injury;
3. The humidity of the greenhouse is relatively high, which is prone to leakage and connection, so the power supply should be cut off immediately after operation, which can also prevent others from operating and causing losses;
4. Lubricate the reducer regularly to ensure the safe operation of the reducer;
5. In any case, the adjustment must be carried out when the machine is shut down to prevent the clothing from being involved and causing personal injury;
6. The maximum operating distance of the remote controller outdoors is 200 meters, and the maximum operating distance between two concrete walls indoors is 20 meters;
7. If the remote control cannot be used normally, first check whether the battery is placed correctly and whether the voltage is normal. Please replace the battery regularly according to the regulations;
8. Roller shutters should not be in severe weather such as strong winds and heavy rains. When the weather is bad, please close the doors and windows near the roller shutters or put away the roller shutters;
9. Acidic or alkaline solvents should not be used to clean the cloth during the installation and cleaning of the electric roller blind. It is recommended that you use a neutral detergent or water for cleaning;
10. The electric roller shutter installation motor contains a positioning switch and an overheating protection device to avoid thermal load overload caused by misuse. Therefore, the motor cannot be operated continuously for a long time (about 4 minutes) or start frequently;
11. If the protective device is activated due to frequent starting of the electric roller blind installation, the motor will temporarily fail to start, and will automatically reset after cooling down, ensuring the normal use of the system under high temperature and strong sunlight.
Contact us for outdoor and indoor blind fabrics and accessories.
Judy Jia: +8615208497699
Email: business@groupeve.com
Post time: Dec-16-2021
